CENTRIFLOW LOW DENSITY LDM: TYPE I METER
The CentriFlow Meter from Eastern Instruments is a Solid Particle Mass Flow Meter that is durable, accurate, maintenance-free, compact, and cost-effective. It is unique and positioned to replace weigh belts, impact meters, loss in weight meters, and static weigh scales, anywhere that accuracy, low maintenance, and zero drift are paramount. Utilizing the patented CentriFlow Technology The CentriFlow Meter offers accurate, cost-effective and simple solutions to your process measurement needs.
All of the meters in the CentriFlow family of meters can be configured as a Type I Meter. The Type I Meter is an open style meter that can be installed directly after feed devices such as Vibratory Conveyors or Belt Conveyors for accurate and dependable flow measurement of virtually any product.
CENTRIFLOW LOW DENSITY LDM: TYPE I METER
LOW DENSITY CENTRIFLOW LDM
The CentriFlow Light Density Meter (LDM) is a specialized version of the CentriFlow Meter designed to measure low density materials (typically products 10 lb/ft3 or less). The radius of the Measurement Pan is twice that of the Standard CentriFlow Meter. By enlarging the Measurement Pan's radius, the LDM is able to accommodate low-density, bulky, large-particle materials such as tobacco (whole leaf, strip, stems, processed leaf, etc.), wood chips, leafy vegetables and many other similar materials. The LDM is available in a variety of sizes to accommodate almost any product that is being fed from a belt or vibratory conveyor. Due to the bulky nature and the larger particle size of products typically fed through the LDM Meter, the meter is typically installed in the In-Line Feed orientation only.
TYPE I LDM METER:
IN LINE ORIENTATION
Because many of the products that are measured with the LDM Meter are large particle materials, such as whole leaf tobacco, wood chips or shreds, or even shredded plastic bags, the meter is typically installed in the In-Line orientation to prevent choking or clogging of the meter. The In-Line orientation ensures that there is no choke point within the flow of material. In the In-Line Orientation, product will flow off of the belt, over a transition and through the CentriFlow Meter which will be tilted backwards at up to 20 degrees. The product will then, continue flowing in its original direction.
VOLUMETRIC CAPACITY OF THE CENTRIFLOW LDM METER TYPE I METER: IN LINE CONFIGURATION |
Meter Size |
FEED DEVICE | CAPACITY | LDM-03 | LDM-06 | LDM-12 | LDM-24 | LDM-36 | LDM-48 |
Vibratory Feed Device |
MIN | 8.44 ft3/min 14.34 m3/hr | 18.75 ft3/min 31.86 m3/hr | 37.50 ft3/min 63.71 m3/hr | 56.25 ft3/min 95.57 m3/hr | 75.00 ft3/min 127.43 m3/hr | 93.75 ft3/min 159.28 m3/hr |
MAX | 25.31 ft3/min 43.01 m3/hr | 56.25 ft3/min 95.57 m3/hr | 112.50 ft3/min 191.14 m3/hr | 168.75 ft3/min 286.71 m3/hr | 225.00 ft3/min 382.28 m3/hr | 281.25 ft3/min 477.84 m3/hr |
Belt Conveyor |
MIN | 8.44 ft3/min 14.34 m3/hr | 18.75 ft3/min 31.86 m3/hr | 37.50 ft3/min 63.71 m3/hr | 56.25 ft3/min 95.57 m3/hr | 75.00 ft3/min 127.43 m3/hr | 93.75 ft3/min 159.28 m3/hr |
MAX | 50.63 ft3/min 86.01 m3/hr | 112.50 ft3/min 191.14 m3/hr | 225.00 ft3/min 382.28 m3/hr | 337.50 ft3/min 573.41 m3/hr | 450.00 ft3/min 764.55 m3/hr | 562.50 ft3/min 955.69 m3/hr |
LOW DENSITY CENTRIFLOW LDM
×
1 / 4
2 / 4
3 / 4
4 / 4
❮
❯